Global Product Type
Building/Construction Paints & Primers
Paint Sub-Category
Primer, Shellac-Based
Color Family
White
Intended Application Environment
Interior/Exterior
Finish/Sheen
Flat
Recommended Level of Ventilation
Moderate
Volume Capacity
1 gal
Packaging Type
Bucket/Pail
Binder/Vehicle Ingredient(s)
Shellac
Diluent/Solvent Ingredient(s)
Denatured Alcohol,Water
Color(s)
White
Application Method
Brush,Roller
Application Temperature Range
0º and 90ºF
Applicable Surface Material
Cement,Concrete,Drywall,Glass/Ceramics,Masonry,Metal,Plaster,Plastic,Wood
Maximum Coverage Area
500 sq ft
Cure/Dry-Time Range
20 min (Touch),45 min (Handle, Re-Coat),1-3 Days (Full Cure)
Age Recommendation
Ages 16 and Up
Product Biodegradability Indicator
N
Product Biodegradability in Days
0
Product Compostability Indicator
N
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Disclaimer Statement
B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 1
Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2
Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils